Table of Contents
Advertisement
RS2010 EN rev.1
9/2/02
Display Settings
Display
Showing the Demonstration
Operational in standby mode only. Press DEMO on
the main unit to turn on/off demonstration mode.
The demonstration scrolls through all display
operations.
Display Clock / Timer
Setting the Clock
1. Press and hold CLOCK to enter clock setting
mode. The hour flashes on the display.
2. Press PRESET DOWN or PRESET UP on the main
unit or PRESET -
or PRESET +
remote control to set the hour . Press CLOCK to
shift to minute digits.
3. Press PRESET DOWN or PRESET UP on the main
unit or PRESET -
remote control to set the minute .
4. Press PROG/SET to save settings.
Note:
• Press CLOCK once to display the current time for
about 8 seconds.
Setting the Timer
1. Press and hold TIMER to enter timer setting
mode. ON TIME will should briefly, then the
hour digit will flash on the display.
2. Press PRESET DOWN or PRESET UP on the main
unit or PRESET -
or PRESET +
remote control to set the hour . Press TIMER to
shift to minute digits.
3. Press PRESET DOWN or PRESET UP on the main
unit or PRESET -
remote control to set the minute .
9:40 AM
Page 9
4. Press TIMER to shift to set timer off time.
5. OFF TIME will show briefly then the hour digit
6. Press TIMER to move on to source selection.
7. Press PRESET DOWN or PRESET UP on the main
8. Press TIMER to move back to timer on time
9. Press PROG/SET to save settings.
Note: Timer will turn on at the last volume level.
on the
Activating the Timer
or PRESET +
on the
Press and release TIMER to turn on/off the timer. The
TIMER indicator will lit.
Adjusting Display Brightness
Press and hold DIM/DEMO to adjust display
brightness.
Sleep Mode
You can select the time interval in minutes before the
unit turns off automatically.
1. Press SLEEP to enter sleep setting mode.
on the
2. Press and hold SLEEP to select the desired sleep
Press SLEEP to check the remaining sleep time.
or PRESET +
on the
S
will flash. Repeat steps 2 and 3 to set the hour
and minute.
unit or PRESET -
or PRESET +
remote control to select source (CD / Tuner / Tape
/ Rec TU)
setting.
SLEEP 00 will show on the display.
time (00, 90, 80, 70, 60, 50, 40, 30, 20, 10, 00).
EN
on the
5
Advertisement
Table of Contents
