Table of Contents
Advertisement
NVIDIA DGX H100 Service Manual
3.
Tighten the two lid screws on the port side of the motherboard tray, as shown in the following
figure:
4.
Tighten the two lid screws on the connector side of the motherboard tray, as shown in the fol-
lowing figure:
5.6. Insert the Motherboard Tray into the
Chassis
1.
Insert the motherboard tray into the chassis partially. Open the ejection levers before you insert
the motherboard tray into the chassis:
32
Chapter 5. Motherboard Tray - Removal and Installation
Advertisement
Table of Contents
