12 BRAKE SYSTEM
12.12
102
S05398-10
H05051-10
S05398-11
Checking that the brake linings of the rear brake are secured
Warning
Danger of accidents Worn-out brake linings reduce the braking effect.
–
Ensure that worn-out brake linings are replaced immediately. (Your authorized KTM workshop will be
glad to help.)
S05376-10
Main work
–
Remove the cable ties.
–
1
Remove screw
with washer.
–
Push the right frame protector to the front and take off at the
bottom.
–
Stand the vehicle upright.
–
2
Remove screw cap
with membrane
–
Add brake fluid up to the marking
Brake fluid DOT 4 / DOT 5.1 (
–
Mount and tighten the screw cap with the membrane and O-
ring.
Info
Use water to immediately clean up any brake fluid that
has overflowed or spilled.
–
Insert the right frame protector from below and push it to the
rear.
–
Mount and tighten the screw
Guideline
Screw, frame protec-
tor
–
Mount the new cable ties.
–
Check the brake linings for lining thickness
A
Minimum thickness
»
If it is less than the minimum thickness:
–
Change the rear brake linings.
–
Check the brake linings for damage and cracking.
»
If there is damage or cracking:
–
Change the rear brake linings.
–
Check that the brake linings are secured.
»
If the brake linings are not secured correctly:
–
Secure brake linings, replace with new parts if neces-
sary.
3
and the O-ring.
A
.
p. 157)
1
and washer.
M5
3 Nm (2.2 lbf ft)
A
.
≥ 1 mm (≥ 0.04 in)
(
p. 103)
(
p. 103)