Table of Contents
Advertisement
Solution System
SOLENOID VALVE DISASSEMBLY AND CLEANING
1
Remove the solenoid valve. See the Solenoid Valve Removal section for instructions.
2
See Figure 3. Remove the (4) (I) Screws and disassemble the valve (be careful not to lose any internal parts).
3
Thoroughly wash dirt from block (J) and diaphragm (K).
4
After reassembling, test the solenoid valve for proper operation.
DISC MACHINE SOLUTION PLUMBING DETAIL
•
Top of Hose (L) uses a .109" diameter hole in the center. This prevents unbalanced solution flow.
FIGURE 4
FIGURE 3
FRONT
G
F
E
D
H
L
FRONT
FORM NO. 56043136 - Adgressor
I
J
K
Assembly
/ BR 850S, BR 1050S - 43
™
Advertisement
Table of Contents
Troubleshooting
