Table of Contents
Advertisement
Mode & Level Settings
Function
Surround Sound
Surnd
Virtual:X
VRT :X
TruVolume
TruVol
Night Mode
Night
Dolby Audio or
DTS signal
ENG - 18
LED Behavior
EFFECT > Surnd > Use the Next/Previous buttons to enable/disable surround sound and
front or dual modes. When enabled (On), Dolby and DTS Surround content will produce full
5.1 sound. With stereo content, EQ Music will produce DTS Virtual:X enhanced sound and
EQ Movie will produce realistic 5.1 effect sound. When disabled (Off), the surround speakers
will be disabled and the sound bar will only produce DTS Virtual sound effect.
Front - Use when placing surround speakers next to the sound bar. Refer to Proper
Placement - Front Surround Mode on page 14.
Dual - Both surround speakers will play the same left and right channel content as the
sound bar.
Note: With stereo content, if EQ mode is set to Direct and Surround is set to Off, the sound
bar will output 2.1 audio without surround.
Virtual:X On
EFFECT > VRT:X > Use the Next/Previous buttons to enable/disable Virtual:X. When
enabled (On), all inputs will produce a virtual sound technology that simulates the effect of
having overhead sound. When disabled (Off), all sources will playback without virtualization.
Virtual:X Off
TruVolume On
EFFECT > TruVol > Use the Next/Previous buttons to enable/disable TruVolume. When
enabled (On), TruVolume provides a consistent and comfortable volume level for a more
enjoyable listening experience.
TruVolume Off
Note: Default setting is Off
Night Mode On
EFFECT > Night > Use the Next/Previous buttons to enable/disable Night Mode. When
enabled (On), the sound bar will lower bass frequency levels to provide a more quiet
environment (ideal for apartment living and homes with sleeping children).
Night Mode Off
Note: Night mode will set to Off after a power cycle.
Dolby Audio: white LED
Dolby Audio and DTS are available on the HDMI ARC and Digital Optical Audio inputs.
When a Dolby Audio or DTS signal is detected, the LED will light up for 3 seconds before
fading away.
DTS signal: amber LED
Description
Advertisement
Table of Contents
