Vizio SB3241n-H6 User Manual page 20

Mode & Level Settings
Function
Surround Level
Surr Lvl
Surround Balance
Surr Bal
Info
Info
Auto VA
Auto VA
Eco Power Mode
Eco Pwr
Input Search
Input Srch
ENG - 16
LED Behavior
LEVEL > Surr Lvl > Use the Next/Previous buttons to increase/decrease the surround
Two center LEDs indicate
sound level. The LED indicators will move to the top with increasing level and to the bottom
with decreasing level.
surround level 0.
Note: Surround must be ON to adjust the surround level.
Two center LEDs
LEVEL > Surr Bal > Use the Next/Previous buttons to increase/decrease the surround
indicate surround
balance level on each side. The LED indicators will move to the top with balance levels to the
balance is centered.
right and down with balance levels to the left.
SETUP > Info > OK to have the sound bar verbally announce the current sound bar input
—
and audio type being played with corresponding LED indicators.
SETUP > Auto VA > Use the Next/Previous buttons to toggle between connecting
the sound bar to a Voice Assistant through Bluetooth (BT), AUX, Both, or OFF. Refer to
Connecting to a Voice Assistant on page 23 for more information.
Note: Default setting is Both.
Eco Power Mode
SETUP > EcoPwr > Use the Next/Previous buttons to enable/disable Eco Power Mode.
On
When ON, the sound bar will go into standby after a period of inactivity. The sound bar will
automatically turn off when no audio signal is detected. Off disables this feature.
Eco Power Mode
Note: Default setting is Off
Off
SETUP > Input Search > OK to initiate an automatic input detection sequence. This is the
same as a long key press of the INPUT button on the remote. Specific inputs will show a
The LED indicator
different LED color:
color will change
per specific input.
•
•
•
AUX In: Green
AUX VA: Violet
Digital Optical: Red
Description
• HDMI (ARC): Magenta
• Bluetooth: Blue
• USB: Orange