Removal steps of the M.2 2242 solid-state drive
Notes:
• A Mylar film might cover the solid-state drive. For access, peel off the film first.
• The thermal pad is placed on the lower surface of the solid-state drive.
Step
Screw (quantity)
1
M2 × 3 mm, flat-head, nylon-coated (1)
1030 Wireless WAN card (for selected models)
For access, remove this FRU:
• "1010 Base cover assembly" on page 35
Removal steps of the wireless WAN card
Torque
Color
Black
0.181 Nm
(1.85 kgf-cm)
.
Chapter 5
Removing or replacing a FRU
37