Table of Contents
Advertisement
Applying labels to the base cover assembly
Notes:
• Depending on the country or region of delivery, the labels might be slightly different from the ones in the
following illustration.
• The new base cover assembly FRU is shipped with a kit containing labels of several kinds. Apply those
labels when you replace the base cover assembly. For the labels that are not shipped with the new base
cover assembly, peel them from the old base cover assembly, and adhere them to the new one.
Item
1
Rating label
3
IMEI label
5
Genuine Microsoft label
1020 M.2 2242 solid-state drive
For access, remove this FRU:
• "1010 Base cover assembly" on page 35
Attention: The M.2 solid-state drive is sensitive. Inappropriate handling might cause damage and
permanent loss of data.
When handling the M.2 solid-state drive, observe the following guidelines:
• Replace the M.2 solid-state drive only for repair. The M.2 solid-state drive is not designed for frequent
changes or replacement.
• Before replacing the M.2 solid-state drive, make a backup copy of all the data that you want to keep.
• Do not apply pressure to the M.2 solid-state drive.
• Do not touch the contact edge or circuit board of the M.2 solid-state drive. Otherwise the M.2 solid-state
drive might get damaged.
• Do not make the M.2 solid-state drive subject to physical shocks or vibration. Put the M.2 solid-state drive
on a soft material, such as cloth, to absorb physical shocks.
36
Lenovo 13w Yoga Gen 2 Hardware Maintenance Manual
Item
2
Rating label
4
Country label
Advertisement
Table of Contents
