Download Print this page
Electrolux ESL43010 Operating Instructions
Electrolux ESL43010 Operating Instructions

Electrolux ESL43010 Operating Instructions

Hide thumbs Also See for ESL43010:

Advertisement

Quick Links

Operating Instructions - Dishwasher Electrolux ESL43010
Control Panel
1. ON/OFF Button
2. Programme Selection/Cancel Button
3. Indicator Lights
End of programme
Salt
- Illuminates when the dishwasher salt has run out
Daily use
1. Load cutlery and dishes into the dishwasher.
2. Fill with dishwasher detergent.
3. Select a wash programme suitable for the cutlery and dishes.
4. Start the wash programme.
Loading cutlery and dishes
1. Before loading the dishes remove large left-overs and soften remnants of burnt food in pans.
2. When loading the dishes and cutlery, please note:
Dishes and cutlery must not impede the rotation of the spray arms.
Load hollow items such as cups, glasses, pans etc with the opening downwards so that water cannot collect in
the container or a deep base.
Dishes and items of cutlery must not lie inside one another, or cover each other.
To avoid damage to glasses, they must not touch.
Lay small objects in the cutlery basket.
- Illuminates when a washing programme has ended

Advertisement

loading

Summary of Contents for Electrolux ESL43010

  • Page 1 Operating Instructions - Dishwasher Electrolux ESL43010 Control Panel 1. ON/OFF Button 2. Programme Selection/Cancel Button 3. Indicator Lights End of programme - Illuminates when a washing programme has ended Salt - Illuminates when the dishwasher salt has run out Daily use 1.
  • Page 2 The lower basket The lower basket is designed to take saucepans, lids, plates, salad bowls, cutlery etc. Serving dishes and large lids should be arranged around the edge of the basket ensuring that the spray arms can turn freely. The cutlery basket Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket.
  • Page 3 Washing programmes Starting the washing machine 1. Check that the baskets have been loaded correctly and the spray arms can rotate freely. 2. Set the washing programme by pressing the programme selection/cancel button until the indicator light corresponding to the desired washing programme illuminates. The end of cycle indicator light flashes. 3.
  • Page 4 Interrupt or cancel a washing programme in progress only if it is absolutely necessary. NB Hot steam may escape when the door is opened. End of the washing programme 1. The dishwasher will automatically stop. 2. An audible signal informs you of the end of the washing programme. 3.