Part 8: Prevention Of Minor Malfunctions - Philco PL 1062 CHIVA User Manual

PART 8: PREVENTION OF MINOR MALFUNCTIONS

All necessary repairs of the washing machine should be performed by an authorised service centre. If it is
necessary to repair your washing machine or you are unable to remedy the malfunction using the information
below:

Disconnect the washing machine from the power socket.

Shut off the water inlet.

Contact the nearest authorised service.
MALFUNCTION
You washing machine is
not working.
Your washing machine is
not fi lling up with water.
Your washing machine is
not draining water.
The washing machine is
vibrating.
EN - 2
Copyright © 201 , Fast ČR, a. s.
POSSIBLE CAUSE
It is not connected to a power
socket.
The fuse has burnt out.
A power outage occurred.
You didn't press the Start/pause
button.
The program selection dial is in
the STOP position (off ).
The washing machine door is not
properly shut.
The water inlet is shut off .
The supply hose may be bent.
The supply hose is clogged.
The inlet valve fi lter is clogged.
The washing machine door is not
properly shut.
The drain hose is clogged or bent.
The pump fi lter is clogged.
The washing machine is not
levelled.
You didn't remove the
transporting screws.
There is a small laundry load in
the drum.
The washing machine is
overloaded or the laundry is
arranged unevenly.
The washing machine is leaning
against a hard surface.
REMEDY
Connect the power plug to the power socket.
Replace the fuse.
Check whether the electricity is working.
Press the Start/pause button.
Turn the program selection dial to the desired
position.
Close the door properly. You should hear it click in.
Open the water inlet.
Check the supply hose.
Clean the supply hose fi lters. (*)
Clean the inlet valve fi lters. (*)
Close the door properly. You should hear it click in.
Check the drain hose.
Clean out the pump fi lter. (*)
Level the washing machine. (**)
Remove the transporting screws. (**)
This will not damage the washing machine in any
way.
Do not insert more laundry than the
recommended load and check that the laundry is
evenly arranged inside the washing machine.
Avoid installing the washing machine leaning on
a hard surface.
When installing the washing machine, leave a free
space of 2 cm between it and the wall or hard
place.