Troubleshooting Tips - RCA RTD210 User Manual

Subtitle, language, camera angle etc.
Disc menu operation and contents may differ from disc to
disc. Please refer to the instructions accompanying the disc.
There are no subtitles ?
• check that subtitles are supposed to exist on that disc.
• Subtitles disappear from the TV screen. See page 21 to
display subtitles.
Subtitle (or language) setting cannot be changed ?
• The disc being played has been recorded in only one
language.
• Depending on the type of DVD, some segments limit
language selection.
The picture is not displayed in the correct format on the
TV (4 x 3 or 16 x 9)
• According to your TV, make the correct "TV Screen"
setting in the set-up menu.
The camera angle cannot be changed with the angle
button ?
• This function does not work when a DVD has not been
recorded with a multi-camera angle system. Some DVDs use
a multi-camera angle system only in certain portions of the
disc.
The menu language is not the one you want ?
• The menu language for your player has not been set dur-
ing set-up.
• Your preferred menu language on a DVD disc (if
available) has not been set during set up.
Audio (spoken) and / or subtitle language is not the one
selected during the initial player set-up ?
• If the audio or subtitle language is not available on the
DVD disc, the language selected during initial player set-up
will not be heard or seen. The disc's priority language
(default language) is selected automatically. If you want
another language, press menu during playback, if the disc
has its own language selection menu.
Radio
STEREO indicator is off.
• Adjust the antenna.
The signal is Mono. Severe hum or noise.
• The signal is too weak. Connect an external antenna.

Troubleshooting Tips

Equipment Specifications:
AMPLIFIER SECTION:
RMS Output Power: Dolby Digital Mode with 10% Total
Harmonic Distortion
Front Channels: 75 Watts each Channel (1KHz, 6 Ohm)
Rear Channels: 50 Watts each Channel (1KHz, 6 Ohm)
Center Channel (RTD210): 100 Watts (1KHz, 4 Ohm)
Center Channel (RTD218): 125 Watts (1KHz, 4 Ohm)
Subwoofer Channel (RTD210): 100 Watts (100Hz, 4 Ohm)
Subwoofer Channel (RTD218): 125 Watts (100Hz, 4 Ohm)
Total RMS Output Power, Dolby Digital mode (RTD210):
450 W
Total RMS Output Power, Dolby Digital mode (RTD218):
500 W
FTC Output Power: Dolby Digital Mode with 10% Total
Harmonic Distortion
Front Channels (L and R): 75 Watts per Channel (1KHz, 6
Ohm)
Rear Channels (L and R): 50 Watts per Channel (1KHz, 6
Ohm)
Center Channel: 75 Watts (1KHz, 4 Ohm)
Subwoofer Channel: 75 Watts (100Hz, 4 Ohm)
Muting Attenuation: 65dB
Frequency Response: 20kHz /-3dB, 1kHz ref.
Subwoofer Frequency Response: 10 Hz / -3db, 80Hz ref.
DIN 1kHz FL / FR STEREO mode : 30W x2 @ 6ohm <10%
THD
Signal to Noise Ratio: 65dB (Dolby digital mode)
Video Signal to Noise Ratio from 40 dB to 60dB
VIDEO SECTION:
Input ( Sensitivity/ Impedance ):1Vp-p/ 75ohm
Output (Level/ Impedance): 1Vp-p/ 75 ohm
Signal to noise ratio: 65dB
FM TUNER SECTION:
Frequency Response: 40Hz – 15kHz +/-3dB
Quieting: 24dBu
Signal to Noise: 60dB(stereo) / 65dB(mono)
Image Ratio: 40dB
IF Rejection: 50dB
JPEG CD SECTION:
Supported format - JPEG
Dimensions (H x W x D inch) :
Unit - 2 x 14.2 x 13.8
Front speaker (RTD210)- 6.1 x 3.1 x 3.5
Front speaker (RTD218) - 39 x 8.7 x 8.7
Rear speaker - 6.1 x 3.1 x 3.5
Center speaker - 2.1 x 9.8 x 3.3
Subwoofer - 12.4 x 6.3 x 14
Wireless receiver - 8.7 x 3 x 9.3
Specifications subject to change without prior notice.
EN
43