Subaru FORESTER 2017 Owner's Manual page 21

About EyeSight
■
(CRUISE) switch
Switches cruise control
When this switch is pressed "
multi information display. This indicates that the main cruise control is turned on.
Refer to pages 40 and 77.
Can be used to cancel the cruise control.
Refer to pages 48 and 82.
* Adaptive Cruise Control and Conventional Cruise Control
■ RES/SET switch
●
SET/-
Can be used to set cruise control
Can be used to reduce the set vehicle speed (when cruise control
Refer to pages 41 and 45 (for Adaptive Cruise Control).
Refer to pages 79 and 81 (for Conventional Cruise Control).
●
RES/+
After cruise control
function at the vehicle speed that was previously set.
Can be used to increase set vehicle speed (when cruise control
Refer to pages 44 and 51 (for Adaptive Cruise Control).
Refer to page 85 (for Conventional Cruise Control).
* Adaptive Cruise Control and Conventional Cruise Control
■
(Following distance setting) switch
Can be used to switch the set following distance in 3 stages: (only when Adaptive Cruise
Control is on).
Refer to page 47.
When the
seconds or longer to select Adaptive Cruise Control or Conventional Cruise Control.
■
switch/
These are used in the following situations.
When switching the screen displayed on the multi information display.
When changing the Warning Volume settings, etc.
Refer to page 91.
18
*
on/off.
" or "
*
.
*
is canceled, this switch can be used to resume the cruise control
(CRUISE) switch is on, press and hold this switch for approximately 2
switch
" appears on the EyeSight display area in the
*
is currently set).
*
is currently set).