Call Vm; Settings; Bluetooth Settings; Add New Device - RCA 25216RE1 User Manual

1. Make sure your phone is in idle mode. (not in Talk mode)
2. Press the MENU Soft key (left) to go to the main menu.
3. Press VOL (- or +) button to scroll to Voice Mail.
4. Press SELECT

Call VM

Settings

Call VM
From the Voice Mail Menu:
1. Press VOL (- or +) button to scroll to Call VM.
2. Press SELECT Soft key
3. Use the VOL (- or +) button to toggle between Line 1 and Line 2 and press SELECT soft key to select.
4. The phone will dial your voicemail access number. You may proceed to access your voicemail per your service
provider's instructions.
SELECT
delete numbers, if necessary.
SELECT
Blue tooth® Settings
To use a Bluetooth
phone with your RCA 25216.
NOTE: This unit supports a maximum of 8 Bluetooth® cell phones. However, only 2 can be connected to
your 25216 at the same time.
To use your Bluetooth® cell phone with this system, you must ensure that Bluetooth® is activated on your cellular
phone and that it is "Discoverable." Activate Bluetooth® on your device and then pair the device to the base.
NOTE: Your Bluetooth® cell phone device should be within 2 feet to 10 feet from the base. If the device is too
close it may create undesired noise. If device is too far it will not pair.
1. Make sure your base is in idle mode.
2. Press the Menu Soft key to enter the main menu.
3. Use the VOL (- or +) button to scroll to BLUETOOTH SETTINGS.
4. Press the SELECT Soft key to enter the sub-menu. There are 5 programmable menus: Add New Device, Bluetooth
Mode, Priority Device, Delete Device and Device Name.

Add New Device

Note：
not the quick Connect/Bluetooth® button.
From the Bluetooth Settings Menu:
1. Use the VOL (- or +) button to scroll to ADD NEW DEVICE.
2. Press the SELECT Soft key. The base will display "ADD NEW DEVICE Searching...", and then it will display a list of
d
Delete button to backspace and
Bluetooth® cellular