Toyotomi zibro LC-30T Operating Manual page 17

5 How to use the Toyotube bottle:
Remove the red colored child safe cap, as
1
indicated by the pictogram on top of the
cap .
After removing the cap, a seal will appear .
2
Before use you must remove this seal .
After removing seal, the bottle valve
3
will appear, the bottle should be in this
condition, before it can be set into the
heater .
Make sure the Toyotube fuel adapter is put
4
in a correct way in the reservoir and slide
the Toyotube bottle into the heater .
6 Slide the Toyotube bottle into the fuel adapter and fix it by gently
pushing with your thumb on the bottom of the Toyotube bottle.
Your heater is now ready for use, follow the instructions in the manual of
your heater regarding ignition (refer to Section D).
7 Follow the instructions in the manual of your heater regarding extinction
(refer to Section G). With a wick type heater, the flame will become
gradually smaller once the bottle becomes empty. Extinguish the heater
and replace the bottle. Once the heater cooled down, you can remove
the Toyotube bottle, by grabbing the bottle and turn it slightly. The bottle
will pop up automatically and you can remove it from the heater.
Once you use this Toyotube bottle with a wick type heater, made by Toyotomi, the "fuel level indicator"
at the front of the heater will always shows orange/red. This is normal, while this sign will only work in
combination with the original metallic removable fuel tank.
Please dispose of the Toyotube bottle according to local/national/international regulation for plastic
waste. Do NOT disassemble the Toyotube to have it refilled by yourself, this is a non-reusable and
expendable packaging.
1
3
2
4
4
15