Appendix; Specifications - Canon imagePROGRAF iPF850 Service Manual

Canon
X.

Appendix

A.

Specifications

Note: All specifications are subject to change without notice.
Table 31 - imagePROGRAF iPF850/iPF840/iPF830 Specifications
Item
Class
Ink Type
Printhead
Maximum Print Resolution
Input power
Power consumption
Standby power consumption
Standby power consumption
(At the low power mode)"
Default setting for the time to
enter the Sleep mode
Power off (standby)
Operational Environment
Acoustic Noise
(acoustic pressure)
Minimal Line Width
Line Accuracy
Registration adjustment
Banding adjustment (Line Feed
adjustment)
Line length adjustment
Head slant adjustment
Color calibration
Head gap adjustment
Non-firing detection
Non-firing compensation
Roll media remaining detection
function
Standard Memory
imagePROGRAF iPF850/iPF840/iPF830 Service Guide
imagePROGRAF iPF850/iPF840/iPF830 Service Guide
44-inch
Dye and pigment reactive ink: BK, MBK , C, M, Y (New Magenta ink same
to imagePROGRAF iPF780 series)
PF-04
Up to 2400×1200dpi
AC 100-240V (50-60Hz)
• imagePROGRAF iPF840/iPF830: Operation: 190 W or less
• imagePROGRAF iPF850: Operation: 200 W or less
100 V - 120V: 5.0 W or less
220 V - 240 V: 5.0 W or less
Approximately 5 minutes
Approximately 0.5 W or less
Temperature: 59 - 86°F, Humidity: 10 - 80 % (Condensation free)
• imagePROGRAF iPF840/iPF830: Operation: Approximately 52 dB (A)
or less Standby: Approximately 35 dB (A) or less (Measure based on
ISO 7779)
• imagePROGRAF iPF850: Operation: Approximately 7.5 Bels or less,
Measurement Conditions:: Plain paper, standard mode(1 pass/25 ips) /
Normal temperature and normal humidity
Approximately 0.02 mm (Theoretical value)
• imagePROGRAF iPF840/iPF830: Approximately ±0.1 % or less. User
adjustments are necessary. Printing environment and media must
match those used for the adjustments. CAD paper required: Plain
paper, CAD tracing paper, coated paper, CAD translucent matte film
only.
• imagePROGRAF iPF850: Approximately ±0.1 % or less, Without
Stacker User are adjustments necessary. Printing environment and
media must match those used for the adjustments. CAD paper
required: Plain paper, CAD tracing paper, coated paper, CAD
translucent matte film only.
Automatic / Manual
Automatic / Manual
Manual
Automatic / Manual
No
Automatic / Manual (5 levels)
Yes
Yes
Yes
320GB HDD / (512MB ) No Expansion
Specification
July 2015
Page 42