Disassembly Of The Parts (Indoor Unit) - LG LM-2164H2L Service Manual

Disassembly of the parts (Indoor unit)

Warning :
Disconnect the unit from power supply before mak-
ing any checks.
Be sure the power switch is set to "OFF".
To remove the Grille from the Chassis
• Set the up-and-down air discharge louver to open
position (horizontally) by finger pressure.
• Remove the securing screws
• To remove the Grille, pull the lower left and right
side of the grille toward you (slightly tilted) and lift
it straight upward.
1. To remove the sensor, housing connect, earth
conductor & step motor conductor with sen-
sor holder, Motor, Evaporator & P.C.B.
Earth
Conductor
- 36 -
Screw
Motor
Conductor
Power
Conductor
Sensor
Conductor
Step Motor
Conductor