Disassembly Of The Parts (Indoor Unit) - LG LM-1830H2L Svc Manual

Disassembly of the parts (Indoor unit, Standard Type)
Warning :
Disconnect the unit from power supply before mak-
ing any checks.
Be sure the power switch is set to "OFF".
To remove the Grille from the Chassis.
• Set the up-and-down air discharge louver to open
position (horizontally) by finger pressure.
• Remove the securing screws
• To remove the Grille, pull the lower left and right
side of the grille toward you (slightly tilted) and lift
it straight upward.
1. To remove the sensor, housing connect, step
motor conductor with sensor holder, Motor,
Evaporator & P.C.B.
Copyright ©2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
- 37 -
Screw
Motor
Conductor
Sensor
Conductor
Step Motor
Conductor
LGE Internal Use Only