Samsung Techwin SCP-2270H User Manual page 81

P(Priority) :
Set the priority of Alarm Inputs. If more than one alarm is simultaneously activated,
the alarm with the highest priority activates before the others. Once the alarm is canceled, the next
highest priority alarm activates.
SEQ. :
Enables setting up a sequence action for the camera in response to an alarm.
You can configure the settings of: HOME/PRESET/SWING/GROUP/TOUR/TRACE/A.PAN/OFF
Alarm Output
Setting 1, 2, 3 :
Enables selecting an Alarm Output method.
- DETECT MODE : Displays the alarm input ports (1~8) and the
motion detection input. If you set MD Input,
you can select one from: OFF/MD/A.TRACK/
MD+A.TRK.
- AUX MODE : Alarm Output 1 and 2 feature N.C/N.O while
Alarm Output 3 is specifi c to N.O. only.
Timer 1, 2, 3 :
- On : Retains an alarm output for a set duration from a
minimum of 1 second to a maximum of 60 hours upon
the alarm occurrence.
- MOMENT : Retains an alarm output only until the alarm is
canceled.
- The Alarm Output is equipped with a relay circuit. The
operation of the alarm output port is as shown in the
diagram below. (Based on NO – Normal Open)
Alarm Out OFF
OUT Off 1, 2, 3 :
- When an alarm event occurs, the output force can be
terminated.
Alarm Out ON
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
Alarm Setting
Alarm Enable
Alarm Input
Alarm Output
MD Dwell Time
Alarm Output
Setting 1 DETECT MODE
Setting 2 DETECT MODE
Setting 3 DETECT MODE
Timer 1 OFF
Timer 2 OFF
Timer 3 OFF
Out Off 1
Out Off 2
Out Off 3
English - 81
OFF
OFF