Replacing The Optical-Drive Connector Board; Procedure; Post-Requisites - Dell Inspiron 15-3543 Service Manual

Replacing the Optical-Drive
Connector Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Slide the optical-drive connector board into the system-board
connector.
2 Replace the screw that secures the optical-drive connector board to the
computer base.
3 Route the antenna cables on the optical-drive connector board and slide
the cables into the slot on the computer base.
4 Close the display and turn the computer over.
5 Route the antenna cables through the routing guide on the computer
base.
6 Connect the antenna cables to the wireless card. See "Replacing the
Wireless Card".

Post-requisites

1 Follow the procedure from step 3 to step 9 in "Replacing the
2 Replace the keyboard.
3 Follow the procedure from step 4 to step 5 in "Replacing the
Drive".
4 Follow the procedure from step 4 to step 6 in "Replacing the
5 Replace the base
6 Replace the battery.
60
Computer. After working inside your
cover.
After Working Inside Your
Palm Rest".
Optical
Hard Drive".