Yamaha XMAX Owner's Manual page 22

Instrument and control functions
 a fuel reserve tripmeter (which
shows the distance traveled since
the fuel level warning light came
on)
 an oil change tripmeter (which
shows the distance traveled since
the last engine oil change)
 a V-belt replacement tripmeter
(which shows the distance trav-
eled since the last V-belt replace-
3
ment)
Push the "TRIP" button to switch the
display in the following order:
Odo (odometer) → Trip (tripmeter) →
Trip Time (time tripmeter) → Oil (oil
change tripmeter) → V-Belt (v-belt re-
placement tripmeter) → Odo (odome-
ter)
When approximately 2.5 L (0.66 US
gal, 0.55 Imp.gal) of fuel remains in the
fuel tank, the display will automatically
change to the fuel reserve tripmeter
mode "F Trip" and start counting the
distance traveled from that point. In
this case, push the "TRIP" button to
switch the display in the following or-
der:
Odo → Trip → Trip Time → F Trip (fuel
reserve tripmeter) → Oil Trip → V-Belt
Trip → Odo
To reset a standard tripmeter (not oil
change or V-belt change tripmeter),
select it by pushing the "TRIP" button
until "Trip", "Trip Time", "F Trip" is dis-
played. While "Trip, Trip Time, F Trip"
is displayed, push the "TRIP" button
for 3 seconds. If you do not reset the
fuel reserve tripmeter manually, it will
reset automatically and disappear after
refueling and traveling 5 km (3 mi).
TIP
 The display cannot be changed
back to "F Trip" after it has been
reset.
 The tripmeter will reset and con-
tinue counting after 9999.9 is
reached.
 The odometer will lock at 999999
and cannot be reset.
Oil change indicator "Oil"
This indicator flashes at the initial 1000
km (600 mi), then at 5000 km (3000 mi)
and every 6000 km (3500 mi) thereafter
to indicate that the engine oil should be
changed. After changing the engine oil,
reset the oil change indicator.
To reset the oil change indicator
1. Turn the key to "ON".
2. Push the "TRIP" button until "Oil"
(oil change tripmeter) is displayed,
and then push the "RESET" but-
ton for 3 seconds. The oil change
tripmeter value will flash.
SELECT RESET
2
1
TRIP
INFO
ZAUM1121
1. "TRIP/INFO" switch
2. "RESET" button
3. Hold the "RESET" button pushed
for 15 to 20 seconds.
3-8