Hardware Description - Watchguard Firebox NV5 Hardware Manual

Interface Specifications
Network Interfaces
I/O Interfaces
Environmental Requirements
To safely install your Firebox, we recommend that you:
Install it in indoors
Put it in a secure area, such as a locked room, to block the device from people who do not have
permission to use it
Connect it to a conditioned power supply to prevent damage from sudden power changes
Other environmental requirements:
Operating temperature: 0° to 40°C (32° to 104°F)
Operating humidity: 5% to 90% non-condensing
Non-operating temperature: –40° to 70°C (-40° to 158°F)
Non-operating humidity: 5% to 90%, non-condensing

Hardware Description

Front View
Front view of the Firebox:
Fail Over
The Fail Over indicator is lit when there is a WAN failover from the primary external interface to the
backup interface. After the external interface connection fails back to the primary external
interface, the indicator is not lit.
Network Interface Status Indicators
The Firebox NV5 has three network interfaces. There are two status indicators for each interface.
Indicator Indicator Color
Yellow
1000
Blinks (speed of blink increases as the data flow
increases)
3 1000Base-TX, RJ45
1 USB 3.0
1 RJ45 Serial Port
Interface Status
Link speed: 1000 Mbps
Data sent and received