LG HOM-BOT CR5 65 Series Owner's Manual page 46

SMART APPLICATION FUNCTION
Setting a HomeGuard Location
To use HomeGuard, you must first set the monitoring location on the virtual map.
1. On the Location Setting screen, click a target location within the indicated area. You can also
move the Robot Cleaner to the desired location manually. Use the camera view in the screen while
adjusting the location.
[Location setting]
Tip
• The Home Guard monitoring location can only be within 4.92 ft to the right and left side
and within 9.84 ft from the front of the home station. If the Home station is relocated,
the HomeGuard position will always use the Home station as the starting point, and so
the HomeGuard position will need to be set again.
2. Use the arrows at the sides of the screen to turn the Robot Cleaner left or right.
Tip
• If the HomeGuard mode has been terminated, or the mode is stopped due to low
battery level, the Robot Cleaner exits HomeGuard mode and returns to the Home station
where it will continue charging until it receives further instructions.
46
[Location setting1]
[Location Setting]
[Location setting2]