Using The Who•Input Button - RCA F27628 User Manual

PAUSE If you're operating a VCR or DVD Player with the remote control, press PAUSE when the disc
Tip
or videotape is playing to pause playback.
To turn off all the
PLAY If you're operating a VCR or DVD Player, plays the disc or videotape.
RCA, GE, and
PROSCAN
REC•VCR+ When the GUIDE Plus+ program guide is on the screen, press REC•VCR+ to program
components that are
your VCR to record a program. If the remote is in VCR mode, press REC•VCR+ to start recording.
connected to the TV,
press ON•OFF twice
REVERSE If you're operating a VCR or DVD Player with the remote control, press REVERSE to go
within two seconds.
backwards on a disc or videotape.
This feature only
SAT•CABLE Puts the remote in SAT•CABLE mode. If you set up the Auto Tuning feature (Chapter
works with most RCA,
GE and PROSCAN
3), pressing the SAT•CABLE button automatically tunes the TV to the correct channel.
products.
SKIP If you press this button before you change the channel, the TV waits 30 seconds and
automatically goes back to the original channel. Each time you press SKIP, you add 30 seconds (i.e, if
you press SKIP two times before you change the channel, the TV waits 60 seconds and automatically
turns back to the original channel).
SOUND Displays the AUDIO PROCESSOR menu.
STOP If you're operating a VCR or DVD Player, stops playing the disc or videotape.
TV Turns on the TV and puts the remote in TV mode. Also displays channel information.
VCR1 Puts the remote in VCR mode. If you set up the Auto Tuning feature (Chapter 3), pressing the
VCR1 button automatically tunes the TV to the correct channel.
VCR2 Puts the remote in VCR mode. If you set up the Auto Tuning feature (Chapter 3), pressing the
VCR2 button automatically tunes the TV to the correct channel.
VOL (up and down) buttons Decrease or increase the TV's volume.
WHO•INPUT In TV mode, press WHO•INPUT to toggle through the available Video Input
channels (VID/FRNT and the current channel). In SAT mode, press to select available channel lists.
Using the WHO•INPUT Button
Use the WHO•INPUT button to toggle through the available input sources (VID and the current
channel) and view the content from the component you have connected to the TV.
1.
2.
3.
Chapter 2
Press TV to place the r emote in TV mode. Make sur e that the content fr om the component is
tur ned ON.
Press WHO•INPUT to tune to the available input sour
Press WHO•INPUT again to tune back to the channel you wer
Using the Remote Control
ce and view the component.
e previously watching.
25