Table of Contents
Advertisement
1886
bag
Partially install three cage assembly screws,
found in the
hardware bag, halfway into
the light kit as shown. It does not matter which
screw holes you choose.
Note:
Fan style may vary.
Note:
Fan style may vary.
9
Ceiling Bracket
Downrod
Installing the Cage
3 of 4
Cage Assembly
Screw
Lift cage assembly into place while passing pull
chains through cage assembly as shown. Align
the keyhole slots in the top of the cage assembly
with the partially installed cage assembly screws.
Wrap the keyhole slots around the screws and twist
counterclockwise.
Reversing the Fan
Reverse
Switch
Ceiling fans work in two directions: downdraft and updraft.
To change the direction of air flow, turn the fan off and let
it come to a complete stop. The reversing switch is located
inside the light fixture. It can only be accessed when the cage
is removed. Slide the reversing switch to the opposite position.
Restart the fan.
Hanging Fan
Wiring
Canopy
bag
Insert the fourth screw, found in
the
hardware bag, in place and
firmly tighten all the four screws.
NOTE: Check to ensure
proper engagement.
Updraft (clockwise rotation)
creates a more indirect airflow.
Updraft airflow is great for
moving warm air downward.
Downdraft (counterclockwise
rotation) creates a direct breeze
and maximum cooling effect.
Blades
Bulbs
1 of 4
Cage Assembly
Screw
ON
Cage
Advertisement
Table of Contents
