Table of Contents
Advertisement
Reference
GUIDE Plus+ IR controllers not working
•
Check to make sure the controllers are positioned correctly over the IR
remote sensors.
•
Your remote may be interfering with the IR controller. Place a piece of
dark tape over the IR controller.
•
GUIDE Plus+ system control of cable box is slower than direct control of the
box itself when changing channels.
Care and Cleaning
Caution: Turn OFF your TV before cleaning.
You can clean the TV as required, using a soft lint-free cloth. Be sure to
occasionally dust the ventilation slots in the cabinet to help assure adequate
ventilation.
The TV's screen may be cleaned with a soft, lint-free cloth as well. Take
care not to scratch or mar the screen. If necessary, you may use a cloth
dampened with warm water.
Never use strong cleaning agents, such as ammonia-based cleaners, or
abrasive powder. These types of cleaners will damage the TV.
While cleaning, do not spray liquid directly on the screen or allow liquid to run
down the screen and inside the TV. Also, avoid placing drinks or vases with
water on top of the TV. This could increase the risk of fire, shock hazard, or
damage to the TV.
Caution
If fixed (non-moving) images are left on the screen for long periods of
time, they may be permanently imprinted on the screen. Such images
include network logos, phone numbers, and video games. This
damage is not covered by your warranty. Extended viewing of
channels displaying these images should be avoided.
55
Advertisement
Table of Contents
