Setting The Vcr1 Channel; Setting The Vcr2 Channel - RCA F27615 User Manual

Interactive Setup
Setting the VCR1 Channel (auto
tuning)
This step lets you set the VCR1 channel. When you set the VCR1 channel
you're telling the TV what channel to tune to when you press the VCR1
button on an RCA, GE, or PROSCAN universal remote.
Indicate which input you used to connect the VCR. If you don't have a
VCR1 component connected to the TV, skip this step or select Not
Connected from the VCR1 Channel choice list. (For more, see Auto
Tuning in Using the Menu System section.)
SETUP
Would you like to use a VCR
with your TV?
1 Use TV with a VCR
2 Skip this step
1. Press MENU or OK to bring up the VCR1 choice list.
SET VCR1 CHANNEL
1 Not connected
2 Channel 3
3 Channel 4
2. Point to the choice that matches the way you have your VCR
connected to the TV.
3. Press MENU or OK to continue.
Setting the VCR2 Channel (auto
tuning)
This step lets you set the VCR2 channel. When you set the VCR2 channel
you're telling the TV what channel to tune to when you press the VCR2
button on an RCA, GE, or PROSCAN universal remote.
Note: If you already own or choose to
purchase an RCA, GE, or PROSCAN
universal remote control, you can program
the remote to auto tune. Otherwise, you
can skip the following four steps.
17