Step 4: Plug In The Tv; Step 5: Place Batteries In Remote; Step 6: Turn On The Tv; Step 7: Program The Tv - RCA F27615 User Manual

Setup and Connections

Step 4: Plug in the TV

Plug the end into the wall outlet, matching the wide blade of the plug
with the wide slot in the outlet. Be sure to insert the plug completely.

Step 5: Place Batteries in Remote

• Remove the battery compartment cover from the back of the
remote.
• Insert fresh batteries. Make sure that the polarities (+ and -) are
aligned correctly.
• Replace the cover.

Step 6: Turn On the TV

Press POWER on the remote, or press POWER on the TV itself.
On-Screen Program Guide
The TV is designed to bring up the GUIDE Plus+ on-screen program
guide when you use the POWER button on the remote to turn on the TV
(after you have set up the GUIDE Plus+ system). For more information on
setting up the GUIDE Plus+ system, see the next section, Interactive
Setup.
To get out of the GUIDE Plus+ System:
• Press OK to exit the GUIDE Plus+ system and tune to the highlighted
channel.
• Press GUIDE to exit the GUIDE Plus+ system and tune to the channel
displayed in the View window.
• Press CLEAR to exit the GUIDE Plus+ system and go to the last
channel you were watching.

Step 7: Program the TV

Proceed to the next section, Interactive Setup. The interactive setup
routine walks you through the steps needed to fully configure the TV.
The first steps ask you to select your preferred language for the menu
system and to begin the auto channel search, which puts available cable
TV or antenna signals into the TV's memory.
10
POWER
POWER
GO
VOL
CHAN
BACK
MUTE
GUIDE INFO
MENU CLEAR