Explanation Of Jacks - RCA 35V432T User Manual

Explanation of Jacks

This section describes the jacks you can use to make connections. There are several
ways to connect components to your TV.
TV ANT Lets you connect a coaxial cable to receive the signal from the antenna,
cable, cable box, or if using the example on page 4, a VCR.
Pb
Pr
L/MONO
R
VIDEO S-VIDEO IN
AUDIO
R
Chapter 1
Graphics contained within this publication are for representation only.
VIDEO 1
Lets you connect a component such as a VCR, DVD player, or
laserdisc player.
Y
• Y, Pb, Pr Provides optimum picture quality because the
• R (RIGHT) AUDIO Provides right audio connection. The
• L/MONO AUDIO Provides left audio connection. The
• VIDEO Provides composite video connection. The video
• S-VIDEO IN Provides better picture quality than the
AUDIO OUTPUT (Not available on model 27R430T) Lets
L
you connect an amplifier or audio receiver for improved
sound quality.
Connections & Setup
video is separated into three signals. Use three video-
grade cables for the connection. When using VIDEO 2
Y, Pb, Pr, make sure to connect left and right audio cables
to the VIDEO 2 AUDIO Input jacks.
right audio connector is usually red.
left audio connector is usually white.
connector is usually yellow.
video jacks because the color part of the signal is
separated from the black and white part of the picture.
When using S-VIDEO IN, make sure to connect left and
right audio cables to the L/MONO and R AUDIO Input
jacks.
5