Table of Contents
Advertisement
9 Starting and Stopping the Engine
► Engage the chain brake (2).
► Depress the decompression valve (1).
► Depress the throttle trigger lockout (5) and
hold it there.
► Pull the throttle trigger (4) and hold it there.
► Move the Master Control lever (3) to posi‐
tion
.
► Hold the chainsaw firmly in one of three ways:
– Place the saw on level ground. Hold the
saw firmly on the ground with your left hand
on the handlebar – your thumb should be
under the handle. Put the toe of your right
boot into the rear handle and press down.
– Place the saw on level ground. Hold the
saw firmly on the ground with your left hand
on the handlebar – your thumb should be
under the handle. Put the heel of your right
boot into the rear handle and press down.
– Hold the saw firmly with your left hand on
the handlebar – your thumb should be under
the handle. Hold the rear handle tightly
between your legs, just above the knees.
► Pull the starter grip slowly with your right hand
until you feel it engage.
► Pull the starter grip quickly and allow the
starter rope to rewind several times until the
engine fires and stops.
► If the engine does not stop: Move the Master
Control lever (3) to position
engine does not flood.
The engine stops.
9.3
Starting the Engine
► Select the correct starting procedure.
0458-784-0121-C
► Engage the chain brake (2).
► Pull off the chain guard (scabbard).
► Depress the decompression valve (1).
► Depress the throttle trigger lockout (5) and
► Pull the throttle trigger (4) and hold it there.
► Move the Master Control lever (3) to posi‐
► Move the Master Control lever (3) to posi‐
► Hold the chainsaw firmly in one of three ways:
so that the
1
2
hold it there.
tion
.
tion
.
– Place the saw on level ground. Hold the
saw firmly on the ground with your left hand
on the handlebar – your thumb should be
under the handle. Put the toe of your right
boot into the rear handle and press down.
– Place the saw on level ground. Hold the
saw firmly on the ground with your left hand
on the handlebar – your thumb should be
under the handle. Put the heel of your right
boot into the rear handle and press down.
– Hold the saw firmly with your left hand on
the handlebar – your thumb should be under
the handle. Hold the rear handle tightly
between your legs, just above the knees.
English
5
3
4
15
Advertisement
Table of Contents
