Table of Contents
Advertisement
SEL Components [Enabled]
Allows you to enable or disable all features of System Event Logging during boot.
Configuration options: [Disabled] [Enabled]
•
•
Erase SEL [No]
Allows you to choose options for erasing SEL.
Configuration options: [No] [Yes, On next reset] [Yes, On every reset]
When SEL is Full [Do Nothing]
Allows you to choose options for reactions to a full SEL.
Configuration options: [Do Nothing] [Erase Immediately]
Log EFI Status Codes [Error code]
Disable the logging of EFI Status Codes, or log only error code, or only progress code, or
both.
Configuration options: [Disabled] [Both] [Error code] [Progress code]
BMC network configuration
The sub-items in this configuration allow you to configure the BMC network parameters.
DM_LAN1/Shared LAN
Config Address source [Previous State]
This item allows you to configure LAN channel parameters statistically or dynamically
(by BIOS or BMC). Previous State option will not modify any BMC network parameters
during BIOS phase.
Configuration options: [Previous State] [Static] [DynamicBmcDhcp]
4-44
The following items appears only when you set SEL Components to [Enabled].
All values changed here do not take effect until computer is restarted.
Chapter 4: BIOS Setup
Advertisement
Table of Contents
