On-Timer - RCA 20F420T User Manual

To turn on the TV to a specific channel at a
specific time, use the On-Timer. Before you
begin, set the clock correctly. Details are on
page 18.
Press MENU to see the main menu.
Press CH+ or CH- to highlight Time.
Press OK to enter the Time submenu.
Press CH+ or CH- repeatedly to highlight
TV/CATV.
Press VOL+ or VOL- to select TV or CATV,
depending on whether you have Cable TV
service or not. Details are on page 11.
Press CH+ or CH- repeatedly to highlight
Channel.
Press VOL+ or VOL- to enter the channel
number. This will be the channel to which
the TV turns on at the specified time.
Press CH+ or CH- repeatedly to highlight
On Time.
Press VOL+ or VOL- to select Once, Daily,
or Off.
If you select Once, the timer will turn on the
TV one time within the next 4 hours only.
If you select Daily, the timer will turn on
the TV at the same time and to the same
channel every day.
Choose Off to cancel the On-timer.
Press CH+ or CH- repeatedly to highlight
0:00 under the line of On Time.
Press VOL+ or VOL- to enter the on time.
Hold down VOL+ or VOL- to change the
time quickly in 10 minute increments; press
OK. The hour is highlighted. Use VOL+ or
VOL- to set the hour. This will be the time
at which the TV will turn itself on.
Press MENU repeatedly to exit the menu
or the menu will automatically disappear
within a few seconds if no buttons are
pressed on the remote control.
Note: The Sound menu is only available
on some models.

On-Timer

Main Menu
Picture
Sound
Preferences
Time
Setup
19
Main Menu
Picture
Sound
Preferences
Time
Setup
Time
Off Time Off
AM12:00
On Time Off
AM12:00
Channel 1
TV/CATV CATV
Clock AM10:00
Time
Off Time Off
AM12:00
On Time Off
AM12:00
Channel 1
TV/CATV CATV
Clock AM10:00
Time
Off Time Off
AM12:00
On Time Once
AM12:00
Channel 8
TV/CATV CATV
Clock AM10:00
Time
Off Time Off
AM12:00
On Time Once
AM11:30
Channel 8
TV/CATV CATV
Clock AM10:00