The settings related to the camera action on alarm can be configured in this section.
•
[Image compression rate upon alarm detection]
Click "Image compression rate upon alarm detection >>" to display the setup menu that can configure the
settings relating to image quality when an alarm occurs. The setup menu will be displayed in a newly
opened window. (®page 121)
•
[Alarm E-mail notification]
Click "E-mail server >>" to display the setup menu that can configure the settings relating to E-mail
notification when an alarm occurs. The setup menu will be displayed in a newly opened window.
(®page 122)
•
[Alarm image FTP transmission]
Click "FTP >>" to display the setup menu that can configure the settings relating to FTP transmission when
an alarm occurs. The setup menu will be displayed in a newly opened window. (®page 123)
•
[Alarm image recording(SD memory card)]
Click "SD memory card >>" to display the setup menu that can configure the settings relating to recording
images on an SD memory card when an alarm occurs. The setup menu will be displayed in a newly opened
window. (®page 124)
•
[Panasonic alarm protocol]
Click "Panasonic alarm protocol notification >>" to display the setup menu that can configure the settings
relating to transmitting Panasonic alarm protocol notifications when an alarm occurs. The setup menu will
be displayed in a newly opened window. (®page 125)
•
[HTTP alarm notification]
Click "HTTP alarm notification >>" to display the setup menu that can configure the settings relating to
transmitting HTTP alarm notifications when an alarm occurs. The setup menu will be displayed in a newly
opened window. (®page 126)
13.4.1 Configure settings relating to image quality on alarm action
Click "Image compression rate upon alarm detection" of "Camera action on alarm" on the [Alarm] tab of the
"Alarm" page. (®page 120)
[Image compression rate upon alarm detection]
Select "On" or "Off" to determine whether or not to change the image quality of "Quality1" (®page 77) upon
alarm detection.
13 Configure the alarm settings [Alarm]
Operating Instructions
121