RCA D900 Manual page 5

programmed. If not, follow these steps to
program the remote.
1. Look up your brand and its code
number(s) on the code list .
2. Press and hold the device button.
3. Enter the three-digit code from the
specific code list.
4. Press CHAN UP or DOWN to see if the
channel changes on the device. If it
doesn't, try the next code listed for your
brand.
5. Repeat these steps until pressing the
CHAN UP/DOWN buttons changes the
channel.
Also, the ALT button can be used for a
second TV or VCR device, laserdisc player,
or cable box. Because no laserdisc or
cable box button appears on the remote,
substitute the VCR button for a laserdisc
3