U N I V E R S A L REMOTE • Consolidates up to 5 component remotes! • Long range RF transmitter for select satellite systems • Comfortable grip & keypad layout promotes ease of use CABLE BOX DVD PLAYER DBS SYSTEM AUDIO SYSTEM Compatible with most...
GE, and PROSCAN branded TVs, VCRs, DBS systems (manufactured before 2003), and DVD players. Note: For users of RCA and PROSCAN DBS products: Older DBS models require that the INFO or MENU key on this remote be used to make program selections.
Dish Network digital satellite receiver. DVD Puts the remote in DVD Mode. SAT Puts the remote in SAT Mode. This key is pre-programmed to control an RCA DIRECTV ® digital satellite receiver manufactured before 2004. Note: This key cannot be reprogrammed. If the SAT key doesn’t control your receiver, use the AUX1 key to program the remote to control your satellite receiver if it was purchased after 2003.
MENU Displays the Main menu. If you are already in the menu system, press OK or MENU to select a highlighted choice. When you are using the remote control to operate an RCA, GE, or PROSCAN VCR (the remote is in VCR mode), the MENU key functions as a PROGRAM key.
Programming For TV—Direct Entry Method Manually turn on the TV. (OFF) Locate the enclosed TV Code List. Find your brand of TV. Press and hold the TV key. Enter a code from the code list. (OFF) Release the TV key, and then press ON•OFF to see if the TV responds to the remote control commands.
Note: The AUX1 key is pre-programmed with codes to control Dish Network digital satellite receivers. The SAT key is pre-programmed with codes to control RCA DIRECTV digital satellite receivers. If you wish to control a second RCA DIRECTV digital satellite receiver, program the AUX1 or AUX2 key with satellite code 5001.
RF remote signal. See the owner’s manual of your DBS system for more details. Note: This feature is only applicable for RCA DIRECTV digital satellite receivers. If you are experiencing interference from other RF components, you may need to change the RF remote control code.
2. Select System Options. 3. Select RF Remote. 4. If you normally use the SAT key on your remote to control your RCA satellite receiver, choose a number between 000 and 255. Follow the on-screen instructions to enter this number as your RF remote control code.
/DVD), first program your VCR in VCR Mode). using the VCR key and then program • If you are trying to turn on an RCA, your DVD using the DVD key. GE or PROSCAN component, press the component key (TV, VCR, DVD,...
Questions Please visit www.rca.com Limited Lifetime Warranty Our company (in the U.S., THOMSON INC. / In Canada, Thomson multimedia Ltd.) will replace this product, regardless of how long you, the original purchaser, own it if found to be defective in materials or workmanship.
* Your RCA universal remote control is compatible with most brands of infrared remote-controlled components manufactured after 1990. Some well-known brands are shown below. The complete list of brands is found on the Code List inside this package. The remote already operates most RCA, GE and PROSCAN products without any programming!