Carrier 40MB C Series Service Manual page 35

Disassembly Instructions Cassette
Parts name
No.
1 Remove the
filter
2 Remove the
panel
3 Remove the
display
board
Procedures
1) Open the grille
2) Remove the filter
Note: the filter is easy to be
damaged, be careful when
removing it.
1) Open the grille
2) Remove the grille
Screw off two screws.
Disconnect the display
board wire and swing
motor wire connected to
the PCB.
Remove the grille.
3) Loose the four screws
and two wireropes, then
the panel can be
disassembled.
1) Open the grille
2) Remove the grille
3) Disassemble the display
board
Remove the display
Remarks
Grill switch
Repeat the operation of step1 of No.1
Repeat the operation of step1 of No.1
Repeat the operation of step2 of No.2
35
2 screws
display board wire
swing motor wire
4 screws
2 wireropes
4 screws