Philips HTS3000 Manual

3 Enjoy
Start disc playback
Press OPEN/CLOSE ç to open the disc tray.
A
B
Place a disc with the disc label facing up.
Press OPEN/CLOSE ç to close the disc tray.
C
D
Playback starts automatically.
E
If the disc menu appears on the TV, use
keys or numeric keypad to select an option in the
menu and press OK to start playback.
To enjoy the powerful surround sound from the
speakers, press SURROUND on the remote
control to turn on the multi-channel surround
mode.
F
Press to stop playback.
Note When you press u button, playback
resumes from where it last stopped. To start playback
from the beginning, you have to press .
Troubleshooting
For more troubleshooting tips, see the user manual.
No picture.
• Press DISC on the remote control.
• Check the connection to the TV and ensure the plugs are fi rmly in place.
No sound.
• Check the speaker connections and settings.
• Check the audio connections and press SOURCE to select the correct input source.
• Press SURROUND to turn on the multi-channel surround output.
The main unit does not work.
• Disconnect the power cord from the power outlet for a few minutes. Reconnect the power cord and try again.
Need help?
User Manual
See the user manual that came with your Philips DVD Home Theatre System.
Online
Go to www.philips.com/welcome
Listen to radio
A
Press RADIO.
The display panel shows 'AUTO INSTALL PRESS
PLAY'.
B
Press u.
All the available radio stations with strong reception
signal will be stored automatically.
Once complete, use í / ë keys to select a preset
C
radio station.
2007 C Koninklijke Philips N.V.
All rights reserved.
www.philips.com
DVD HOME THEATRE SYSTEM
Quick Start Guide
What's in the box?
Main Unit
1 centre, 2 front, 2 rear speakers FM wire
and subwoofer antenna
HTS3000
1
Connect
2
Set up
3
Enjoy
Remote Control Composite
video cable
and 2 batteries
User
Manual
AM/MW Power cable
loop antenna