Memorizing Tv Channels - RCA RTD300 User Manual

RTD300 EN 7/25/03 2:36 PM

Memorizing TV Channels

To Memorize Channels Automatically
To Memorize Channels Manually
To add additional channels without affecting your existing stored channels, follow the steps below:
Page 17
1
1
Press the [SETUP] button.
Press the [ ∞ ] button to move the cursor
down to CHANNEL SET. Press [ENTER] to view
CHANNEL SET menu.
2
2
Select "AUTO CHANNEL SEARCH".
With the cursor at AUTO CHANNEL SEARCH,
press [ENTER] to select the type of signal you
have.
Select "Detect Automatically" with
the [ ] button.
∞
Press [ENTER] and the auto channel search
starts.
Channel number changes successively from 01
to 125, while only broadcasting channels are
memorized automatically. When the Automatic
Channel Set process is completed, the first
memorized channel is displayed.
3
3
Check the memorized channels.
To check the memorized channels, press [CH up or down] on the remote
control.
1
1
Press the [SETUP] button and select
"CHANNEL SET".
Select "Add/Remove Channels".
2
2
Select and store a channel.
Press the [NUMBER] buttons on the remote
control to select the desired channel to store.
Press [3] to change "REMOVED" into "ADDED".
3
3
Check the memorized channel.
To check the stored channels, press [CH up or down] on the remote control.
EN
SETUP
CLOCK SET
TIMER RECORDINGS
CHANNEL SET
FUNCTIONS
LANGUAGE SELECT
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
Channel Change: CH3
AUTO CHANNEL SEARCH
What type of signal are
you using?
Cable TV
Antenna
Detect Automatically
AUTO CHANNEL SEARCH
Now scanning channel 11
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
Channel Change: CH3
ADD/REMOVE CHANNELS
Channel 02
is now ADDED.
13