Siemens EZ9 KZ Series Information For Use page 9

5.4 Cooking zone displays
When you place an item of cookware on the cooking
surface, the indicator for the relevant cooking zone
lights up in the touch display.
Hotplate Status
Detected cooking zone
¡ The cookware on the cooking sur-
face has been detected.
¡ The cooking zone display lights
up.
¡ Touch the display to select the
cooking zone.
Selected cooking zone
¡ The displayed cooking zone has
been selected.
¡ You can set the power level.
Cooking zone that is switched on
¡ The displayed cooking zone is
switched on.
¡ The selected power level lights up
on the display.
6 Before using for the first time
Observe the following recommendations.
6.1 Initial start-up
When you switch on the appliance for the first time, the
standard language setting appears on the display as a
first step to configure the hob.
You can change these settings at any time in the basic
settings. → Page 20
7 Basic operation
7.1 Switching the hob on
▶
Touch ​ ⁠ .
Before using for the first time en
Hotplate Status
No cookware on the cooking zone
¡ You have removed the cookware
from the cooking surface.
¡ The previously selected power
level changes colour.
Other displays
¡ You cannot set the selected cook-
ing zone.
¡ For more information, touch
Possible causes:
¡ Up to five items of cookware
evenly distributed over the cook-
ing surface can be heated at the
same time.
¡ The cookware is not suitable for
use on an induction hob.
¡ The appliance has exceeded its
maximum power consumption.
Note: The cooking zone displays may show a different
size or shape to the cookware actually being used.
This is normal and does not affect the functioning of
the hob.
5.5 Residual heat indicator
The cooking surface has two residual heat indicators
that indicate that the cooking zone is still hot.
¡ The ​ ⁠ symbol in the main screen. One, two or all
three lines light up depending on the intensity of the
residual heat.
Do not touch the cooking surface while the residual
heat indicators are still lit or immediately after they
have gone out.
The residual heat indicators will remain lit for as long
as the cooking surface is still hot, even if you switch off
the cooking surface.
6.2 Setting Home Connect
To start the connection settings, select the Home Con-
nect setting in the basic settings and follow the instruc-
tions in the section entitled
→ "Home Connect ", Page 21.
6.3 Cooking with induction
In comparison to conventional hobs, induction techno-
logy brings with it a series of changes and has a num-
ber of benefits such as time savings when cooking and
frying, energy savings as well as greater ease of clean-
ing and care. It also offers improved heat control as the
heat is generated directly in the cookware.
A signal tone sounds and the touch display lights
up.
a The hob is ready to use.
​ ⁠ .
9