Table of Contents
Advertisement
The default basic setting is 200–400 m. If your home is
located at this height above sea level, do not set the
boiling point. Select the setting that matches your
home's height above sea level.
Note: Temperature 4/100 ºC is sufficient to boil effi-
ciently. For a more intensive boil, select a lower level.
14 Meal assistant
All types of food can be prepared with this function.
The appliance selects the optimal setting for you.
The recipes for the cookingSensor function are only
available after connecting to the wireless cooking
sensor.
14.1 Activating the meal assistant
1.
Select a cooking zone.
2.
Touch the active cooking mode and select .
15 Wireless cooking sensor
To use cookingSensor, you must purchase a wireless
cooking sensor.
You can purchase the wireless cooking sensor from
customer service, in our online shop or in a specialist
shop siemens-home.bsh-group.com .
15.1 Scope of delivery
After unpacking all of the parts, check for any transport
damage and for completeness of delivery.
Wireless cooking sensor
¡
Silicone patch
¡
Template
¡
15.2 Attaching the silicone patch
The silicone patch secures the cooking sensor to the
cookware. For fitting on the cookware:
1.
The adhesive area on the cookware must be free
from grease. Clean and dry the container thor-
oughly, and rub the adhesive area using alcohol, for
example.
Tip: If you want to set the temperature more precisely,
you can increase or decrease this by 1 °C to 5 °C. To
do this, touch the selected temperature and then select
+ / -. Then select the required temperature. To cancel
and exit the menu, touch the symbol.
3.
Select the required programme group and food.
4.
Follow the instructions on the display.
14.2 Cancelling the meal assistant
1.
Select the cooking zone.
2.
Select the active cooking mode and switch to a dif-
ferent cooking mode.
a The function is switched off.
2.
Remove the protective film from the silicone patch.
Adhere the silicone patch to the outside of the cook-
ware in the correct place using the enclosed tem-
plate as a guide.
3.
Press down all over the surface of the silicone
patch, including in the centre.
4.
Leave the adhesive to dry for one hour. Do not use
or rinse out the cookware during this time.
Note: If the silicone patch comes loose, use a new
one. If required, you can purchase a set with five silic-
one patches from specialist retailers, from our cus-
tomer service or on our official website siemens-
home.bsh-group.com by quoting the article number
17007119.
All adhesives break down over time when they are
stored. To prevent this from happening, place the silic-
one bases on their containers as soon as they are
cleaned.
15.3 Attaching the wireless cooking sensor
1.
Ensure that the silicone patch is completely dry be-
fore attaching the cooking sensor.
2.
Attach the cooking onto the silicone patch so that it
fits perfectly.
Meal assistant en
17
Advertisement
Table of Contents
