Table of Contents
Advertisement
Additional Information
No sound or distorted sound
• Make sure your player is connected properly. Make sure all cables are securely inserted
into the appropriate jacks.
• Turn your TV to its Video Input Channel (go to page 9).
• Sound is muted when you're using search features (fast forward, reverse, frame advance,
etc.).
• If you connected an audio receiver to your DVD Player, make sure you chose the correct
input setting on the receiver.
Remote control won't work
• You might be in the wrong mode.To operate your DVD Player, press the
the remote before you press any other buttons. If you're operating the TV, press the
button first, etc. (this remote operates most RCA, GE, and Proscan TVs and you can
program it to operate other brands of consumer electronics components).
• Check battery installation— the direction of the + and – on the batteries must match
information in battery compartment cover.
• Insert new batteries in the remote.
• Operate the remote control at a distance of no more than 20 feet.
• Remove any obstacles between the remote and the DVD Player. If your DVD Player is in
an entertainment cabinet, the glass doors might obstruct the remote control from
operating the DVD Player. Open the doors.
• Drain the remote's microprocessor — remove the batteries; press and hold the
for 60 seconds; replace the batteries and try the remote again. After this you'll need to
reprogram the remote.
Can't program the remote
• The universal remote control that came with your DVD player is already programmed to
operate most RCA, GE, and Proscan TVs and satellite receivers.You can program it to
operate many other brands and models of TVs, cable boxes, and digital satellite receivers.
However, the remote doesn't support all brands and all models of TVs, satellite receivers,
and cable boxes so there is a possibility the remote can't be programmed to operate your
component. Instructions for programming the remote control are on page 12.
Lost the remote control
• To order a new remote control, go to page 52.The buttons on the front of the DVD
operate the DVD
player
system without the remote control.The buttons on the front of the unit are described on
page 5. Also, if you have another RCA, GE, or Proscan brand product with a remote
control that has a DVD button, some of the buttons will probably operate this product if
you press the DVD button first.
Can't advance through a movie
• You can't advance through the opening credits and warning information that appear at the
beginning of movies because the disc is programmed to prohibit that action.
's basic functions, but you won't be able to use the menu
player
46
DVD
button on
TV
1
button
Advertisement
Table of Contents
