Using Optional Car Cord Adapter; Using The Dcc08 Car Cord Adapter - RCA CC615 User Manual

Powering Your Camcorder
Optional Car Cord Adapter
The optional DCC08 car cord shown on
page 52 allows you to power your
camcorder from the cigarette lighter
socket of a car, truck, or RV. It converts
12-volts to a 6-volt output.
Note: Consult the installation and operating
instructions enclosed with the DCC08 for
complete operating instructions.

Using the DCC08 Car Cord Adapter

Cigarette
Lighter Socket
Optional DCC08 Car Cord Adapter
1. Place the POWER switch in OFF to
turn off the camcorder. Power
indicator turns off.
2. If the battery is attached to the
camcorder, remove it.
3. Hold the top of the power connector
flush against the back of the camcorder
and push the bottom of the power
connector down until it locks into
place.
4. Take the vehicle's cigarette lighter out
of the socket.
Cautions: The DCC08 is designed to be
used only with vehicles having negative
ground electrical systems.
Use only car cord adapter DCC08 with
this camcorder. Use of any other car
cord adapter may damage the camcorder
and void your warranty.
POWER Indicator
Power
Connector
5. Insert the car cord's cigarette lighter
plug into the vehicle's cigarette lighter
socket. The POWER indicator on the
car cord adapter will light.
6. Place the VCR/OFF/CAMERA switch
in CAMERA to turn on the camcorder.
The power indicator lights.on.
Caution: Make sure the camcorder's
power is turned off before removing the
car cord's plug from the cigarette lighter
socket.
15