Playback On A Tv/Vcr With A/V Jacks - RCA CC4352 User Manual

Playback
Playback on TV (or VCR) with Audio/Video Input Jacks
To connect your camcorder to a TV monitor (or VCR) with audio/video in jacks, you
need an optional audio/video cable such as VH83 shown on page 53. If your TV is
already connected to a VCR, attach the camcorder to the VCR and watch what the
camcorder is recording or playing on the TV.
Playback on a TV/VCR with A/V
jacks
AUDIO
IN
VIDEO
Back of
VCR or
TV Monitor
AUDIO
IN
VIDEO
IN
Back of
Stereo
VCR or
TV Monitor
Installation
1. Attach the white plug on one end of
the audio/video cable to the AUDIO
IN jack on the TV (or VCR).
Notes: If your cable does not have white
and yellow plugs, be sure to attach the
same color to the audio jacks.
If your TV (or VCR) has stereo AUDIO IN
jacks, attach the plug to the one labeled
MONO. If one is not labeled MONO, you
might need a Y-adapter, such as AH25,
shown on page 53 to hear both channels.
46
IN
Yellow Video Plug
L
R
White Audio Plug
Audio/Video Cable
(such as VH83)
—OR—
White Audio Plug
Y-Adapter
(such as AH25)
Yellow Video Plug
2. Attach the yellow plug to the VIDEO
IN jack on the TV (or VCR).
3. Attach the white plug on the other
end of the audio/video cable to the
AUDIO jack (located under the small
cover) on the side of the camcorder.
4. Attach the yellow plug to the yellow
VIDEO jack on the camcorder.
Yellow
VIDEO
Jack
Yellow
Video Plug
White
Audio Plug
Yellow
Video Plug
White
Audio Plug
Audio/Video Cable
(such as VH83)
White
AUDIO
Jack