Carrying In The Outdoor Unit - Toshiba MMY-MAP0806HT8P-ME Installation Manual

5

Carrying in the outdoor unit

CAUTION
Handle the outdoor unit carefully, observing the following items.
When using a forklift or other machinery for loading/unloading in transportation, insert the fork of the forklift into
•
the rectangular holes for handling as shown below.
When lifting up the unit, insert a rope able to bear the unit's weight into the rectangular holes for handling, and
•
tie the unit from 4 sides.
(Apply padding in positions where the rope comes into contact with the outdoor unit so that no damage is
caused to the outer surface of the outdoor unit.)
(There are reinforcing plates on the side surfaces, so the rope cannot be passed through.)
Rectangular
holes for Side
handling
NO GOOD
Front/Back
GOOD
Fork of the
forklift
13-EN
1117101401-3_EN.indd 7 1117101401-3_EN.indd 7
GOOD NO GOOD NO GOOD
Plaster
board
Rope
Plaster
board
Rectangular Reinforcing
holes for plate
lifting
– 7 –
■ Weight centre and weight
◆ Weight centre of an outdoor unit
A. Anchor bolt position B.
700
X
No. Model type
MMY-MAP080*
A MMY-MAP100*
MMY-MAP120*
MMY-MAP10A*
MMY-MAP12A*
B
MMY-MAP140*
MMY-MAP160*
MMY-MAP14A*
MMY-MAP16A*
C
MMY-MAP180*
MMY-MAP200*
Anchor bolt position C. Anchor bolt position
920 1310
X
X (mm) Y (mm) Z (mm)
510 355 600
595 360 690
790 360 710
X
(Unit : mm)
Mass (kg)
242
299
370
14-EN
1/12/16 3:18 PM 1/12/16 3:18 PM