Standard Horizon HX320E Owner's Manual page 34

z Remove all registered (paired) Bluetooth
1. Select "DELETE ALL" on the screen by press-
ing the [▲] or [▼] key in step 4 above, then
press the [ENTER] soft key.
2. Select "OK?" on the screen by pressing the
[▲] or [▼] key, and then press the [ENTER]
soft key to remove all paired Bluetooth Head-
sets from the list.
z Adjust the sensitivity of the Bluetooth
NOTE: This feature is only available if the connected Bluetooth
supports it. The optional SSM-BT10 does not support this function.
1. Press and hold the [ MENU/SET ] key to display the SETUP menu screen.
2. Select "BLUETOOTH" on the screen by pressing the [▲] or [▼] key, and
then press the [ENTER] soft key.
3. Select "MIC SENSE" on the screen by press-
ing the [▲] or [▼] key, and then press the
[ENTER] soft key ("3" is default).
4. Select Microphone Sensitivity by pressing the
[▲] or [▼] key, and then press the [ENTER]
soft key.
Page 32
devices from the list
®
microphone
®
headset
®