Standard Horizon HX320E Owner's Manual page 17

TRANSMIT POWER Indicator
"HI": 6 W ( 5 W ) *
"MD": 2.5 W
"LO": 1 W
* ( 5 W TX required in some countries )
"MEM" Indicator
This indicator shows the channel is registered in the transceiver "Scan Memory".
"P-SET" Indicator
Shown when the channel is programmed into the Preset Channel memory.
Battery Indicator
: Full battery power
: Enough battery power
: Low battery power
: Poor battery power. Charge battery.
: Charge the battery immediately
" " Bluetooth Indicator
Shown when the Bluetooth
Appears: Bluetooth
Blinks: Bluetooth
" " VOX Indicator
Shown when the VOX (Voice operated transmission) function is enabled.
"P" Indicator
Shown when the channel is set as the Priority Channel.
"D" Indicator
Shown when the Dual Watch function is enabled in FM radio mode.
"T" Indicator
Shown when the Triple Watch function is enabled in FM radio mode.
Channel Display
The operating channel is shown on the LCD in both the transmit and the
receive modes.
VOL Indicator
This indicator shows the receive audio volume level.
SQL Indicator
This indicator shows the squelch setting level.
function is activated.
®
device is connected.
®
device not connected.
®
Page 15