Table of Contents
Advertisement
8.5 CHANNEL GROUP
Set the Channel Group according to the region.
1. Press and hold the [MENU/SET] key.
2. Press the [▲] or [▼] key to select "CHANNEL SETUP".
3. Press the [SELECT] soft key.
4. Press the [▲] or [▼] key to select "CHANNEL GROUP".
5. Press the [SELECT] soft key.
6. Press the [▲] or [▼] key to select the desired
channel group "INTERNATIONAL", "USA", or
"CANADA" * .
* (In the European version, when setting the
region, the selected European Channel Group
will be displayed instead of "CANADA". For
details, refer to the Note on the Setting the
Region on the separate yellow insert sheet.)
7. Press the [ENTER] soft key to store the selected setting.
8. Press the [CLR/
8.6 KEYPAD LOCKING
In order to prevent accidental channel change, the HX320's keypad may be
locked.
Hold down the [CLR/
[VOL+] and [CLR/
LOCK" will appear on the entire screen, to indicate that the functions are locked.
To unlock the keys, press and hold the [CLR/
8.7 NOAA WEATHER CHANNELS ( In USA and Canada only )
1. Press the [MENU/SET] key to display the
MENU screen, then press the [WX] soft key.
The transceiver changes to the weather
channel mode and the radio will be set to the
last used NOAA weather channel.
2. Press the [▲] or [▼] key to select a different
NOAA weather channel.
3. To exit from the NOAA weather channels, press the [MENU/SET] key to
display MENU screen, then press the [CH] soft key. The transceiver will
revert to the channel in use prior to switching to the weather channel mode.
Page 18
] key to return to radio operation.
] key to lock the keypad (except the PTT, [VOL-],
] keys) so that they are not accidentally changed. "KEY
] key until "UNLOCK" appears.
Advertisement
Table of Contents
