Advertisement
5. Details of simulations
Simulation input procedure: C → ë → 0 → ë
Main code
Sub code
01
01
Mirror operation check
02
Optical system sensors (MHPS, LHPS) state display
03
Lens operation check
04
Lens aging
02
01
ADF aging
02
ADF sensors states display
03
ADF individual load operation check (paper feed motor forward rotation)
04
ADF individual load operation check (paper feed motor reverse rotation)
05
ADF individual load operation check (transport motor forward rotation)
06
ADF individual load operation check (transport motor reverse rotation)
08
ADF individual load operation check (Paper feed solenoid)
10
ADF individual load operation check (paper feed motor + paper feed solenoid)
When the print button is pressed, the mirror is scanned at a speed corresponding to the currently set copy
magnification ratio.
The copy magnification ratio can be arbitrarily set.
ON/OFF state of the optical system sensor can be monitored by the LED on the operation panel.
Sensor name
Operation panel LED
MHPS
Paper empty lamp (ç)
LHPS
JAM lamp (ê)
The lens unit moves to the following positions of the magnification ratios continuously.
AB series: 100% → 115% → 122% → 141% → 200% → 86% → 81% → 70% → 50% → 100%
Inch series: 100% → 121% → 129% → 141% → 200% → 95% → 77% → 64% → 50% → 100%
The operation of SIM 1-3 is repeated continuously.
The ADF original transport operation is performed.
The ADF sensors ON/OFF states can be monitored with the LED on the operation panel.
When the third digit of the multi display is "0" the following display is made.
Sensor name
Original set sensor
Resist sensor
Timing sensor
Repulsion sensor
ADF open/close sensor
Paper feed cover sensor
If, at that time, the magnification ratio display key is pressed, the third digit of the multi display is changed to "1"
and the following display is made.
Sensor name
Tray width sensor (297mm, 11")
Tray width sensor (257mm)
Tray width sensor (210mm, 8.5")
Tray width sensor (182mm)
Tray vertical sensor (240mm)
Tray vertical sensor (300mm)
Original width size sensor
Content
Operation panel LED
JAM lamp (ê)
Paper empty sensor (ç)
Drum position jam lamp ( )
Resist position jam lamp ( )
ADF position jam lamp ( )
Paper exit position jam lamp ( )
Operation panel LED
First step paper size lamp
Second step paper size lamp
Third step paper size lamp
Fourth step paper size lamp
Resist position jam lamp ( )
Paper exit position jam lamp ( )
Manual feed selection lamp
8 – 3
Advertisement
