Repair; Replace/Clean Suction Filter; P/N 133377; Pump Housing Assembly P/N 133372 - Graco 230 VAC EGP Instruction Manual

Repair

Repair
Refer to Parts, on page 18 for the numbers in this
section.

Replace/Clean Suction Filter

P/N 133377

Disassembly
1. Follow Pressure Relief Procedure. page 7.
2. Turn off and disconnect the power to the pump.
3. Remove the pump from the tank.
4. Remove the suction tube from the pump.
5. Remove the suction filter (22) using a 3/4 in. (19
mm) hex wrench (F
IG
F . 2
IG
12
. 2).
22
6. Inspect the suction filter (22) and either clean or
replace, as needed.
Reassembly
1. Tighten the suction filter (22) into the pump inlet,
using a 3/4 in. (19 mm) hex wrench (Torque 30
ft-lbs, 40.7 N•m) (F
IG
2. Complete using the Installation information
beginning on page 6.
Pump Housing Assembly P/N
133372
Disassembly
1. Follow Pressure Relief Procedure. page 7.
2. Turn off and disconnect the power to the pump.
3. Remove the pump from the tank.
4. Remove the suction tube from the pump.
5. Remove the four Allen screws (6) using an 5/16 in.
(8 mm) hex wrench (F
6
F . 3
IG
. 2).
. 3).
IG
3A8558C