Table of Contents
Advertisement
Assembly
WARNING
Do not plug in your vacuum until you are familiar with all instructions and operating
procedures.
1
Place the upper
handle onto the
base and push it
down. Then attach
the handle with the
2 screws that are
taped to the handle
in a plastic bag.
3
Wrap the power
cord around the
cord release clips
and clip the end
of the plug to the
power cord.
5
Push hose into
clip and insert
end of hose
into base of
vacuum.
2
4
Insert the end of the hose
into the back of the vacuum
and twist clockwise to lock
it into place.
Put your accessory tools on the
vacuum and you're ready to go!
Extension Wand
NOTE: Some units come with tool storage on the front
of the handle. You can store your TurboBrush® here.
Dusting Brush
TurboBrush® Tool
www.BISSELL.com
Insert the lower
cord wrap and
turn it to the
left to lock it
into place.
5
Advertisement
Table of Contents
