Selecting External Network Detection Settings - Epson Home Cinema 5050UBe User Manual

Setting
Passphrase
Parent topic:

Selecting External Network Detection Settings

If you are using a compatible network control system, you can select settings that allow your projector to
be detected by those systems.
1. Press the Menu button.
2. Select the Network menu and press Enter.
3. Select Network Configuration and press Enter.
4. Select the Others menu and press Enter.
5. If you want to use the notification function of PJLink, turn on the PJLink Notification setting and
enter the IP address of the notification recipient in the Notified IP Address setting.
6. If your network environment uses an AMX controller, turn on the AMX Device Discovery setting to
allow the projector to be detected.
7. If your network environment uses a Control4 or Control4 SDDP controller, turn on the Control4
SDDP setting to allow the projector to be detected.
Options
—
Enabling WPA or WPA2 Security
Description
For the selected security, selects
the pre-shared passphrase used
on the network
52